Hardwood Floor Installation in Virginia

Wood is the floor many homes in our area were built with, and it is still the one people ask about most for living rooms, dining rooms and bedrooms.

Dining room with a new natural red oak strip floor and a wooden table on felt pads near a window

Where hardwood fits

We install two kinds of wood floor. Solid hardwood is one piece of wood from top to bottom and is nailed to a wood subfloor. Engineered hardwood has a real wood top on a layered core, which keeps it steadier through the seasons and lets it float or be glued where nailing does not suit the room.

In older split levels and colonials, we often lift carpet to find original oak strip floors in some rooms and plywood in others. New boards can be woven in next to an existing floor, or a whole level can be laid fresh so every room matches.

Measure: what we check

Wood floors depend on careful planning, so the measure visit is a little longer for hardwood.

  • The type of subfloor, which decides between nailing, floating or gluing
  • Flatness and firmness of the base, with loose spots marked for screws
  • Board width and direction, laid out so the rows run straight through each doorway
  • Where new wood meets an existing floor, and how the two will be joined
  • Time for the boards to acclimate in the house before the install day

Install: how it goes

  1. Acclimate the boards

    Bundles are opened and left in the rooms so the wood settles to the house.

  2. Prepare the subfloor

    The old covering is removed, the base is cleaned and loose spots are screwed down.

  3. Paper down, first row straight

    Builder's paper goes down and the first row is set off a line, face nailed where the nailer cannot reach.

  4. Nail board by board

    Boards are blind nailed through the tongue with joints staggered across the room.

  5. Finish the edges

    Trim covers the gap at the walls and reducers or thresholds are set at each doorway.

Living with your new hardwood

Wood dislikes grit more than anything. A soft broom or a vacuum with a felt head, used often, does most of the work. When it needs more, a well wrung microfiber mop and a cleaner made for finished wood are enough.

Wood moves a little through the year. Thin gaps between boards in the dry months are normal and usually close again in spring. Keep felt pads under furniture, use mats at the doors and trim pet nails, and a prefinished floor will keep its look for a long time.

Hardwood questions

Solid or engineered?

Solid boards can be sanded many times over their life. Engineered boards are steadier and suit more kinds of subfloor. We help you choose at the visit based on the room and what is underneath.

Can new wood match our existing floor?

Often it can come close in species and width. Where an exact match is not possible, we suggest a clean break at a doorway with a threshold.

Do you install prefinished or unfinished wood?

We install prefinished boards, which arrive with the finish already on. The room is ready to use the same day.

Why does wood need to sit in the house first?

Boards arrive from a warehouse with a different climate. A few days in the rooms lets them settle, so gaps and tight spots are less likely later.

Planning hardwood for your rooms?

Send the rooms and a few words about the space. We set up a measure visit and write the plan down before anything is booked.