Luxury Vinyl Plank Installation in Virginia

Vinyl plank is the floor we lay most often in living rooms, kitchens and hallways. It is quiet underfoot, simple to keep clean and forgiving in rooms that see a lot of daily traffic.

Gloved hands clicking a light oak look vinyl plank into the previous row next to white baseboard

Where luxury vinyl plank fits

Most vinyl plank sold today is a rigid core plank with a printed wood look and a clear wear layer on top. The planks lock together on their long and short edges and float as one sheet, so nothing is glued or nailed to the base. That makes the install quick and tidy, and it also means the floor can only be as flat as the surface underneath it.

In the split levels and two story homes around us, vinyl plank often runs through the main level as one continuous floor: living room, dining area, kitchen and the hall to the bedrooms. Planned well, that run has no awkward thresholds and the plank direction stays the same from the front door to the back.

Measure: what we check

At the measure visit we look at the things that decide how a plank floor will behave for years.

  • The length of the longest run, which tells us whether the floor can stay continuous or needs a break at a doorway
  • Flatness of the base, checked with a long straightedge in several directions
  • The height of the finished floor against doors, the dishwasher opening and the stair nosing
  • The direction of the main light, since planks usually look calmest running toward the largest window
  • What sits under the current covering, from carpet pad to sheet vinyl to an older plank floor

Install: how it goes

  1. Clear and lift

    Furniture is moved, the old covering comes up and the base is swept and scraped clean.

  2. Flatten the low spots

    Dips are filled with leveling compound and high spots are ground down until the straightedge sits evenly.

  3. Lay out the rows

    The first row is set straight off a chalk line, and the last row is planned so it does not end in a thin sliver.

  4. Click and stagger

    Planks are locked in with a tapping block, with end joints staggered so no seams line up.

  5. Finish the edges

    Door casings are undercut, spacers come out and baseboard or quarter round covers the gap at the walls.

Living with your new luxury vinyl plank

Vinyl plank asks for very little. Sweep or vacuum with a hard floor setting, and wipe with a well wrung microfiber mop and a pH neutral cleaner when it needs more. Skip wax, polish and steam, which can cloud the top layer.

Felt pads under chair and table legs protect the wear layer, and a mat inside each door catches the grit that causes fine scratches. Keep a few spare planks from the job in a closet. If one ever gets a deep gouge, a single plank can be swapped out without lifting the whole room.

Luxury vinyl plank questions

Can vinyl plank go over our old floor?

Sometimes. Flat, firmly stuck sheet vinyl or tile can stay under a rigid core plank. Carpet and pad always come up first. We decide at the measure visit, once we have seen what is there.

Does the plank need time in the house before install?

Most makers ask for the boxes to sit in the room for a day or two so the planks match the room's temperature. We plan the delivery around that.

Can one floor run through the whole main level?

Often, yes. Long runs may need a hidden break at a doorway, depending on the plank. We explain where and why before anything is written up.

Will the floor sound hollow?

A flat base and the right underlayment keep the sound solid. Many planks have a pad attached, and we add one only when the product calls for it.

Planning luxury vinyl plank for your rooms?

Send the rooms and a few words about the space. We set up a measure visit and write the plan down before anything is booked.